Bot B Setting; Operation Mode - Nice M-BOARD Instrucciones De Seguridad Y Advertencias Para Instalación, Uso Y Garantía

Once selected, return the PROG switch to the OFF position (all
down) for the control panel to save the configuration.

16 - BOT B SETTING

To set "BUTTON B" set the PROG switch to the position as shown
in the figure below, and press the LEARN button according to the
desired setting:
Once selected, return the PROG switch to the OFF position (all
down) for the control panel to save the configuration.

17 - OPERATION MODE

In this mode it is possible to change the sequence of pulses received
by the control panel:
APFP: Open, Stop, Close, Stop;
AF: Open, Close;
APF: Open, Stop, Close;
LED blinks 3 times Closing only
LED blinks 4 times Stopping only
LED blinks 5 times Partial opening
ON
1 2
LED blinks 1 time
LED blinks 2 times Opening only
LED blinks 3 times Closing only
LED blinks 4 times Stopping only
LED blinks 5 times Partial opening
DP
3 4 5 6 7 8
Pulse*
ENGLISH
79