Warranty Terms - VITO PRO-POWER Manual De Instrucciones

EN PT
EN
ATTENTION
Always read instructions before use
electric tool.
For correct and safety utilization:
Work area must be clean and
organized all the time.
Avoid electric tool contact with
humidity. Don´t use in presence of
flammable liquids or gases.
Keep it away of children´s.
Stow tools that you don´t need.
Must use glasses and protection
mask, if release operation dust.
Never force tool. Learn and
attended all specification for get
all benefits of this toll always with
maximum security.
All the time use the correct tool for
right effect.
Use appropriate clothes, avoid
large clothes and jewels prevent
accidents.
Tie your air if you have big.
If work outside and humidity is high,
is advisable use rubber gloves and
anti slip shoes.
Never transport electric tool by the
cable.
Always secure the work piece in
order to be hands free.
TOOL ATTENTIONS
Keep screens, orifices and engine
box clear.
Wipe them with a soft and clean
cloth by applying gentle air
pressure.
ATTENTION!
Do not use the Screwdriver in a low
speed for a long period of time.
1 Turn the knob to the "+" in the sense
of clockwise to increase the speed
and the sign "-" in the opposite
direction clockwise to decrease.
In uses long lasting watch the
temperature of the machine, never
that the body because it may be hot,
use the handle.
WARNING!
Do not tamper with the selection of
the drill while the drill is in operation.
WARNING
Always disconnect the current
Screwdriver before making any
charges.
The bushing fitting can be used with
drills to 13mm in diameter.
To open, fast to the bottom of the
bushing fitting and rotate the top
clockwise to open, enough to put
the drill.
To hold the drill steady and the
bottom of the bushing fitting and
rotate the top clockwise clock.
MAINTENANCE
1 clean the Screwdriver after each use.
2 keep fit bushing always clean, dry
and free of any debris.
3 store it in a safe and dry place,
away from children.
4 if the drill is too slow or working
with a different, perhaps to change
the brushes. Must be changed by a
qualified person.
DECLARATION
OF CONFORMITY
We declare under our exclusive
responsibility, that the product
VIBEP - PLASTER BOARD
ELECTRIC SCREWDRIVER,
meets the following standards or
standardization documents:
EN 60745-1; EN 60745-2-2;
EN 55014-1; EN 55014-2;
EN 61000-3-2; EN 6100-3-3,
according to the determinations of
the directives:
2006/42/CE - Directive machines;
S. João de Ver,
June 15th of 2015.
Central Lobão S. A.
Responsible for the Technical File

WARRANTY TERMS

The warranty of this compressor
is two years from the date of
purchase. You should, therefore,
keep your proof of purchase during
this period of time. The warranty
covers any manufacturing defect
in material or operating, as well
as parts and work needed for
their recovery.Excluded from
the warranty the misuse of the
product, any repairs carried out by
15
7 7