Troubleshooting - Ryobi P28014 Manual Del Operador

PROBLEM
Spray pattern is inconsistent.
Unit will not spray or sprays
improperly.
Unit is "spitting" after trigger is
released.
Spray is weak.
Unit runs for a short period
then shuts off.
This product has a Three-year Limited Warranty for personal,
family, or household use (90 days for business or commercial use).
For warranty details, visit www.ryobitools.com

TROUBLESHOOTING

POSSIBLE CAUSE
Unit is not level and is allow-
ing fluid to enter through the
tank filter.
Unit is being shaken or moved
too fast.
Fluid level is too low in the
tank.
Liquid in tank is too thick.
Filter or nozzle needs to be
cleaned.
Solution is too thick.
Battery needs charging.
Solution is too thick.
or call (toll free) 1-800-525-2579.
11 — English
SOLUTION
Unit must be kept level during use.
Allow the unit to remain still until the liquid inside settles
and normal spraying/fogging resumes, then move slowly
and do not shake the unit during use.
Replenish the tank to a higher volume.
Empty the tank, clean both the tank and filter, then try
again. Make sure that all chemicals/liquid used in the
sprayer are as thin as water.
Clean filter as described in Cleaning the Filter.
Make sure that all chemicals/liquid used in the sprayer
are as thin as water.
Recharge the battery.
Make sure that all chemicals/liquid used in the sprayer
are as thin as water.