Operator's Manual
Appendix I
illumipro-10 Set-Up and Installation Checklist
Facility Name:
Facility Address:
Instrument Serial Number:
Installation Location:
Installation Performed By:
The illumipro-10 shipping container and packaging have been inspected for
1.
damage; no damage found. Installation of damaged could create a hazard
to the end user.
The illumipro-10 Operator's Manual has been received and reviewed.
2.
Operational Precautions and Limitations have been reviewed and are
understood.
The Installation Location meets Electrical and Environmental Specifications
3.
described in the illumipro-10 Operator's Manual.
Installation of the illumipro-10 and its accessories has been completed as
4.
described by the Operator's Manual.
The illumipro-10 has been powered-on and the Power On Self-Test was
5.
successful.
Set-up of the illumipro-10 including Time Format, Date Format, and Preferred
6.
Language has been completed as described in the Operator's Manual.
illumipro-10 Performance Verification was completed as described in the
7.
Operator's Manual. Acceptable results were obtained for Block A and Block
B.
A copy of the printout for the System Check and Optics System Verification is
8.
attached to this record.
illumipro-10 Operator's Manual: ENGLISH
Copyright© Meridian Bioscience, Inc.
SN11007, REV. 07/2010
All manuals and user guides at all-guides.com
Facility Information
Instrument Information
Set-Up and Installation
Installation Complete
(Room, Floor, Building, et cetera)
Installation Date:
(Street Address)
(City, State)
No
N/A
Yes
Yes
No
N/A
Yes
No
N/A
Yes
No
N/A
Yes
No
N/A
Yes
No
N/A
Yes
No
N/A
Yes
No
N/A
(Signature/Date)
Page 17