Illumipro-10 Decontamination Record - Meridian Bioscience illumipro-10 Manual Del Operador

Operator's Manual
Appendix II

illumipro-10 Decontamination Record

Decontamination of laboratory equipment must be completed prior to return of the instrument for
servicing. Decontamination must be completed according to the instructions provided. Please
complete the information below and attach the completed record to the instrument prior to return.
Instruments returned for service without evidence of decontamination will not be serviced. If the
instrument is submitted for service without decontamination documentation, it will be shipped
back to the user at the user's expense.
1. Wipe exterior surfaces of the illumipro-10 with a lint-free towel moistened with a 10% Bleach-based
Disinfecting Solution. Minimum contact exposure time for kill of Bloodborne Pathogens (Hepatitis-A,
HIV-1, MRSA, SARS, et cetera) is 1 minute.
2. Open illumipro-10 Lids A and B. Wipe inside lid surface and Heat Block Surfaces with lint-free towel
moistened with 10% Bleach-based Disinfecting Solution.
minute.
3. Close Lids. Affix the completed illumipro-10 Decontamination Record to instrument. Package the
instrument in the protective foam packaging and shipping container provided.
Instrument Serial Number:
Facility Name:
Facility Address:
Contact Information:
The illumipro-10 has been decontaminated as described above. Exterior and Interior contact surfaces
have been wiped with a 10% Bleach-based Disinfecting Solution. Minimum contact exposure times have
been monitored.
Performed By:
illumipro-10 Operator's Manual: ENGLISH
Copyright© Meridian Bioscience, Inc.
SN11007, REV. 07/2010
All manuals and user guides at all-guides.com
Instrument Information
Facility Information
Decontamination Information
Minimum contact exposure time is 1
(Telephone)
(Street Address)
(City, State)
(Name, Title)
(e-mail)
(Signature/Date)
Page 18