Meridian Bioscience illumipro-10 Manual Del Operador página 9

All manuals and user guides at all-guides.com
Operator's Manual
ASSAY MODE
The ASSAY MODE allows the user to access and run programs on the illumipro-10. The user selects
the Block to be used from the Main Menu and then selects the Assay to be run. Each Block can be
selected and run independently. Upon selection of the Block to be used, the Assay Mode Menu appears.
The User selects the assay to be run and follows the instructions displayed on the illumipro-10 display.
The illumipro-10 display indicates that a test is in process and prompts the user to enter Sample
Identification information or to abort the test. Sample Identification information can be entered directly
using the Keypad, may be scanned using the illumipro-10 barcode scanner or may be entered using the
external keyboard. Additional information regarding the illumipro-10 barcode scanner is provided in
Appendix IV of this manual.
The User enters Sample Identification Information by following the instructions shown on the illumipro-10
display and initiates the Assay Run.
NOTE: Block temperature will appear in the 'TEMP' field. The 'Block Status' field will display a timer
indicated time until assay completion.
illumipro-10 Operator's Manual: ENGLISH Page 9
Copyright© Meridian Bioscience, Inc.
SN11007, REV. 07/2010