Winkhaus panicLock AP4 Instrucciones De Montaje página 133

Installation, Operating and
Maintenance Instructions
Declaration of performance No. 012.4 CPR
1. Unique identification code of the product type:
2. Type, batch or serial number of a different identifier for identification of the construction product accor ding to Article 11,
paragraph 4 of the Construction Products Regulation (CPR):
3. Purpose of use intended by the manufacturer or intended purpose of use of the construction product in accordance with
the applicable harmonised technical specification:
4. Name, registered trade name or trademark and contact information of the manufacturer in ac cordance with Article 11,
paragraph 5 of the Construction Products Regulation (CPR):
5. Name and contact information of the authorised person, if applicable, who is commissioned with the tasks in accordance
with Article 12, paragraph 2 (CPR):
6. Systems or systems for the evaluation and inspection of the performance reliability of the construction product in
accordance with Annex V of the Construction Products Regulation (CPR):
7. The MPA NRW with the identification number 0432-MPA-NRW of the notified body has carried out the type inspection
in accordance with the specifications of EN 179:2008 and evaluated and verified the performance reliability according to
System 1, as well as issued the test report.
8. Declared performance:
Significant features
Capability for passage
Permanent functionality of the release capability
Capability of independent closing (of fire/smoke
protection doors in escape routes)
Permanent functionality in regard to the ca pability of
automatically closing C as well as in regard to ageing and
diminished quality
Fire resistance capability E (Room closure) and heat
insulation I
Control of harmful substances
9. The product described under sections 1 and 2 fulfils the performances listed under section 8.
This declaration of perfor mance is ussed under the sole resposability of the manufacturer identified in point 4.
Signed for and on behalf of the manufacturer by:
Meiningen, 14/06/2021
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen ∙ T +49 369 3950 - 0 ∙ tuerverriegelung@winkhaus.de ∙ www.winkhaus.de
T SB June 2021 · EN · All rights reserved.
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
panicLock AP4
panicLock AP4, Emergency exit locks to EN 179
STV-AP4 179 "TE"
For doors in escape routes with fittings according to EN 179
Aug. Winkhaus GmbH & Co. KG
Berkeser Str. 6
D-98617 Meiningen-Dreißigacker / Deutschland
N / A
System 1
Certificate 0432–CPR–00107-01
(version: 06)
Performance
No harmful substances may be con tained
within or released by this pro duct.
ppa. Dr. D. Warnow, Technical Director
Harmonised techni cal specification
fulfilled
Class 7
fulfilled
Class 7
Class B
ppa. A. Dinkelborg, Director of Product Management
63 5062179
EN 179:2008
EN
6