Elcometer 506 Guia Del Usuario página 13

11 SPARES & ACCESSORIES (continued)
Description
Aluminium Dolly 14.2mm (x10)
Aluminium Dolly 14.2mm (x100)
Aluminium Dolly 20mm (x10)
Aluminium Dolly 20mm (x100)
Aluminium Dolly 50mm (x4)
Stainless Steel Dolly 50mm (x4)
11.2 DOLLY CUTTERS
Standards or test methods will determine if the Inspector should cut /
score around the dolly prior to test to separate the test area from the
rest of the coating; information which should be recorded with the
results.
The Elcometer 506 is supplied with a dolly cutter and handle
appropriate for the dolly size included in the kit. Spare / replacement
cutters are available to purchase using the sales part numbers below.
Description
Dolly Cutter
Dolly Cutter
Dolly Cutter
Dolly cutter handles must be ordered separately - a handle is not
supplied with the dolly cutter accessory.
Description
Dolly Cutter Handle
Dolly Cutter Handle
Dolly Cutter Arbor
11.3 DOLLY SKIRTS
Standard skirts are available for 14.2mm and 20mm dollies as well as
50mm dollies. Special skirts are also available for testing on thin
substrates to even out the load, as using a standard skirt on a thin
substrate may cause the substrate to bend or flex during test.
www.elcometer.com
For Dolly Sizes (mm)
14.2mm
20mm
50mm
For Dolly Cutter
T9990014CT
T9990020CT
T9990050CT
Part Number
T9990014AL-10
T9990014AL-100
T9990020AL-10
T9990020AL-100
T9990050AL-4
T9990050SS-4
Part Number
T9990014CT
T9990020CT
T9990050CT
Part Number
T9991420H
T9991420H
T9990050H
en-12
R