Tabla De Contenido - Elcometer 506 Guia Del Usuario

CONTENTS
Section
1 Gauge Overview
2 Box Contents
3 Securing the Dolly
4 Preparing the Gauge for Test
5 Attaching the Gauge to the Dolly
6 Performing the Test
7 Assessing the Results (Destructive Testing)
8 After Test
9 Digital Pressure Gauge Features & Functions
10 Verifying the Gauge Calibration
11 Spares & Accessories
12 Adhesives
13 Warranty Statement
14 Technical Specification
15 Legal Notices & Regulatory Information
For the avoidance of doubt, please refer to the original English language version.
Gauge Dimensions:
Gauge Weight:
Note: The pressure gauge supplied with the Elcometer 506 Digital Adhesion Tester is intended for use
only as an integral part of the instrument and should not be removed by the user and used
elsewhere.
© Elcometer Limited 2012 - 2017. All rights reserved. No part of this document may be reproduced, transmitted,
transcribed, stored (in a retrieval system or otherwise) or translated into any language, in any form or by any
means (electronic, mechanical, magnetic, optical, manual or otherwise) without the prior written permission of
Elcometer Limited.
en-1
R
Instrument Length: 290mm (11.5")
With 14.2mm & 20mm Standard Dolly Skirt: 1.8kgs (4lbs);
With 50mm Standard Dolly Skirt: 2.0kgs (4.4lbs)
Page
en-2
en-3
en-3
en-4
en-5
en-6
en-8
en-9
en-9
en-11
en-11
en-13
en-14
en-14
en-15
www.elcometer.com