BABYTREND HC05B Manual De Instrucciones página 6

OPERATION
•The shoulder straps of the 5-point harness
11)
have 2 attachment positions. Select the
position that places the shoulder strap
level with, or below, the top of the child's
shoulders (Fig. 11a).
• Carefully place the child in the seat and
position the safety harness around the
child's waist and over the shoulders.
Place the crotch strap between the
child's legs. Insert the male end of each
shoulder/waist belt into the buckle on the
crotch strap. Tighten the harness to be
snug around the child's waist and over the
child's shoulders (Fig. 11b).
TO RELEASE SAFETY BELT
• Push Button on Center Clasp, the two
12)
Harness Buckles will pop free (Fig. 12).
RECLINE SEAT
• Squeeze recline lever on back of the
13)
seat and adjust to the preferred recline or
upright position (Fig. 13).
Use caution not to trap arms, hands and
fingers when adjusting recline positions.
9
Copyright © 2018, Baby Trend ® Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Fig. 11a
Adjust for a snug fit
Fig. 11b
Center Clasp
Fig. 12
Fig. 13
TO ADJUST SEAT HEIGHT
WARNING:
Do not
adjust seat height with child in
seat. Adjust seat height before
placing your child in the high
chair.
WARNING:
Always check that the height
adjustment bracket is level
and both left and right sides
locked before placing child in
the high chair.
WARNING:
Never
rest the height adjustment
bracket on the locking pins.
• Squeeze the Release Handles on both
14)
sides simultaneously of the Height
Adjustment (Fig. 14a) and adjust to the
ideal position (Fig. 14b).
DO NOT adjust with child in the seat.
ATTENTION:
Make sure the Height Brackets lock on
the lowest position. rest Height
DO NOT
Adjustment Brackets on the Locking Pins
(Fig. 14c).
Copyright © 2018, Baby Trend ® Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
OPERATION
Release Handle
Fig. 14a
Highest Position
Lowest Position
Locking Pin
Fig. 14b
Fig. 14c
10