Instructions For The User; How To Use The Bain-Marie; Draining The Tank; Maintenance And Cleaning - MBM MINIMA Serie Instrucciones Para La Instalación, El Uso Y El Mantenimiento

3.
3.1

HOW TO USE THE BAIN-MARIE

Please remember that this equipment has to operate when water has reached the appropriate level in the tank; it
cannot be used without water.
In order to turn the bain-marie equipment on, turn handle (see figure 1) from position "0" to position "1" and the
green led will switch on .
Turn the handle of the thermostat (see Figure 2) and bring it to the required temperature level; the yellow led will
automatically switch on (indication of the heating).
When reaching the pre-set temperature level, the yellow led will then switch off.
In order to switch the bain-marie equipment off, just turn the handle "Figure 1" until the "0"reaches the index.
fig. 1
3.1.1

DRAINING THE TANK

To perform this operation you need to insert the supplied relevant extension into the drain tap, with the click-on
connection. Place beneath it a tray for collecting the water, then open the tap by pulling the knob to the right.
Warning: It is advisable this operation be performed when the water is not too hot.
4.
STAINLESS STEEL PARTS
- Clean the stainless steel parts with soapy lukewarm water, then rinse well and dry thoroughly.
- Brilliance is kept using liquid POLISH periodically, (Polish is a product easy to be found).
- Absolutely avoid to clean the stainless steel with common steel-wool, or common steel brushes and scrapers, as
they may discard ferrous particles which, on depositing, cause rust spots. You may, if you like, use stainless steel-
wool passed on following the butter-finish direction.
- Should the unit remain unused for long periods, heavily rub all the steel surfaces with a cloth slightly wetted with
vaseline oil, in order to cover them with a protective film. Periodically ventilate the premises.

INSTRUCTIONS FOR THE USER

fig. 2

MAINTENANCE AND CLEANING

- 11 -
GB