General Remarks - MBM MINIMA Serie Instrucciones Para La Instalación, El Uso Y El Mantenimiento

- Carefully read the instructions contained in the present booklet as they supply important information relating to
safe installation, use and maintenance.
- Keep this booklet with care, for any further consultation by the various operators.
- Having removed the packing, make sure the unit is in good order and in case of doubt, do not use the unit, but call
on skilled personnel.
- Before connecting the unit, make sure the data appearing on the serial plate correspond to those of the main
electric supply.
- The unit must be used only by a person trained for its operation.
- For any repairs, please call exclusively an authorised technical service centre, and ask for original spare parts
only.
- Non compliance with the above may compromise the unit's safety.
- Do not wash the unit with direct or high-pressure water jets.
- Do not obstruct openings or draft grids or heat vents.
- All units are supplied with a 200cm long cable having the characteristics shown in Tab. 3.
- The hook-up wire for the power supply connection should not have characteristics below the type with rubber
insulation H07RN-F.
This equipment is to be used with dedicated containers, supplied by the manufacturer. Use of non-
compliant pans or other containers is not recommended as they might drop on the tank bottom and
damage it as well as not obtaining the required effect from the equipment. The amount of usable space
between tank bottom and accessory bottom shall be at least 2 centimetres. Use of these machinery
always requires presence of water in the tank during operation. We cannot be held liable for any event
caused by usage of the machine without water in the tank.
In case of non-compliance with the indications contained in the present manual, both on the user's part and on the
installing technician's part, the Manufacturer declines any responsibility, and any possible accident or fault caused by
the above mentioned non-compliances will not be imputable to the Manufacturer.
The Manufacturer declines any responsibility for any imprecisions appearing on the present booklet, ascribable to transcription
or printing errors. Furthermore, the Manufacturer reserves the right to make any modifications to the product deemed useful
or necessary, without prejudicing its essential characteristics.
GB

GENERAL REMARKS

- 8 -