Adjust Default Settings - SPX Nemisys Guia De Inicio Rapido

Adjust Default Settings

The System Setup functions let you view information about the scan tool and
adjust default settings for the scan tool as follows:
1 Press the On / Off button to turn the scan tool on; wait for the Application Manager
screen to appear.
Figure 7: Application Manager Screen and System Setup Screen
2 Use the Down Arrow key to select System Setup and then press the ENTER key.
This displays the System Setup screen, shown above.
3 Use the Down Arrow key to select an item to adjust (described below) and then
press the ENTER key.
•
Contrast Adjust
•
Print Header
•
Unit Defaults
down time. It also lets you turn the audible beep and print header functions
on or off.
•
Revision Levels
•
Technical Support
•
Hardware Tests
time clock for the scan tool and the scan tool's serial number.
•
Language
—
•
External Memory Card Check
card in the compact flash port.
4 Follow any on-screen instructions; use the Arrow keys as needed to adjust settings;
use the EXIT key to exit the screens. For detailed instructions, refer to the User
Guide.
Quick Start Guide
adjust the contrast of the LCD screen.
—
set up a heading for reports that you print from the scan tool.
—
set the date, time, units-of-measure, and automatic shut
—
display software version numbers.
—
display technical support information.
—
test the LCD screen, keypad keys, and beeper; view the
—
set the default language for the scan tool software.
—
English
check the system files on a compact flash
Setup
5