3M DBI SALA ROLLGLISS R550 Instrucciones De Uso página 17

Ocultar thumbs Ver también para DBI SALA ROLLGLISS R550:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 55
Inspection Date:
Component:
Inspection:
R550 Device
Inspect for loose fasteners and bent or damaged parts.
(Figure 2)
Inspect the Housing Assembly (A), Rope Sheave (B), Anchor Loop (D),
Thimble (F), and Rescue Hub (H) for distortion, cracks, or other damage.
If the R550 Device is stored in a Humidity Resistant Case, inspect
the Humidity Indicator on the outside of the case (see Figure 12). If
the Humidity Indicator displays a reading of 60 or greater (pie sector
indicator): (1) Open the case and inspect the R550 Device per the
remaining steps. (2) Maintain the case as described in Section 6.1.
Ensure the Lifeline (C) pulls through the device smoothly. Inspect the
entire rope for cuts, burns, severely abraded areas, and excessive wear.
Inspect the Carabiner (E) and Snap Hooks (G) for damage, corrosion, and
working condition.
Inspect the entire unit for signs of corrosion.
Labels
Ensure that all labels for all products are present and fully legible.
(Figure 15)
PFAS and Other
Additional Personal Fall Arrest System (PFAS) equipment (harness, SRL,
Equipment
etc) that are used with the Anchorage System should be installed and
inspected per the manufacturer's instructions.
Structure
Verify the structure to which the structure is attached meets the strength
requirements from Table 1 in all possible directions of loading.
Serial Number(s):
Model Number(s):
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
Corrective Action/Maintenance:
All manuals and user guides at all-guides.com
Table 2 – Inspection and Maintenance Log
(See Section 2 for Inspection Frequency)
17
Inspected By:
Date Purchased:
Date of First Use:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
Approved By:
Date:
User
Competent
Person

Publicidad

Tabla de contenido
loading

Tabla de contenido