Adapter Gb628R (Ao Large To Dhs/Dcs); Intended Use; Operating Principle; Safe Operation - B.Braun Acculan 3Ti Manual De Instrucciones

Aesculap Power Systems
Acculan® 3Ti attachments
6. Adapter GB628R (AO large to
DHS/DCS)
Abb. 5

6.1 Intended use

The adapter is used for connecting tools with DHS/DCS
coupling to drill or reamer attachments with AO-
Protek coupling.

6.2 Operating principle

The adapter is driven by a drill or reamer attachment
powered by a motor fitted with an Aesculap Acculan®
3Ti coupling. The drill or reamer attachment transfers
the rotational speed of the motor to adapter GB628R
and thus to the coupled tool.

6.3 Safe operation

Note
Use the adapter only with Synthes tools with DHS/DCS
tool coupling or tools of a comparable geometry!
For information on how to connect the drill and
reamer attachments, siehe Coupling and uncou-
pling of attachments on the drill and reamer motor
unit.

Coupling the adapter

For coupling the adapter, siehe Coupling a tool.
10

Uncoupling the adapter

For uncoupling the adapter, siehe Uncoupling a
tool.

Coupling a tool

Slide back unlocking sleeve 6.1.
Insert the tool shaft in its correct position down to
the stop in the tool coupling of the adapter.
Release unlocking sleeve 6.1.
The tool is now coupled.

Uncoupling a tool

Slide back unlocking sleeve 6.1.
Remove the tool.

6.4 Accessories

Designation
DHS Tripple Reamer
DHS Reamer
DHS Drill Bit

6.5 Technical specifications

Dimensions L x W x H, in
mm
Weight, in grams
Drive speed, in 1/min
Synthes art. no.
338.130, 338.430
357.044, 357.045
357.047, 351.270,
359.081, 359.079
GB628R
61 x 22 x 22
approx. 70
max. 250