Before Use; Product Assembly - cecotec Ready Warm 8100 Power Quartz Manual De Instrucciones

3. BEFORE USE

• Take the product out of the box.
• Remove all packaging materials. Keep the original box.
• Make sure all the components are included and in good conditions, otherwise, contact
immediately the official Technical Support Service of Cecotec.
• Check that all connections are completely secure and that the device is securely positioned
before using it.

4. PRODUCT ASSEMBLY

Assembling the stand
1. Insert the lower support into the base and
fix it tightly using the 4-M6 X 30 screw.
Then, insert the clamp into the lower post.
(fig.1)
2. Attach the lower support to the middle
support using the 3-M5 X 6 screw provided.
3. Attach the upper support to the middle support using the 3-m5 x 6 screw.
3-M5 X 6 screw
2
4. Assemble the heater head onto the upper support and use the rotating knob to fix them
tightly. Then, pass the power cord through the clamp so it is kept held as shown on the
following picture:
Middle support
Lower support
Power cord
Base
Lower support
Middle support
Lower support
3
READY WARM 8100 POWER QUARTZ
ENGLISH
Clamp
4-M6 X 30 screw
Base
Upper support
3-M5 X 6 screw
Power cord
Base
35