Aux In Mode - auna Ambient Manual Del Usuario

All manuals and user guides at all-guides.com
Button functions during playback via BT
Button
VOLUME |  ENTER / SCAN

TUNE+ Button
TUNE- Button
SOURCE /BT Button

AUX IN MODE

In AUX IN mode, you can connect external playback devices such as a
smartphone or an MP3 player to use them as the playback source for the
radio.
NOTE
Switch the radio and the external playback device off before connecting
them. Note also the operating instructions for the device that you want to
connect to the radio.
• Connect the external playback device to the AUX IN connection of the
radio using the AUX cable.
• Briefly press the Standby button to switch on the radio.
• Briefly press the SOURCE/BT button (several times if necessary) until
AUX IN appears on the LCD display.
• Turn on the external playback device and start playback.
• Afterwards, set the desired volume using the dial on the radio.
Alternatively, you can increase the volume on the external playback
device.
• To exit AUX IN mode, turn off the radio and the external playback
device.
• Remove the AUX cable from the AUX IN socket of the radio.
Alternatively, you can press the SOURCE/BT button to switch directly
from AUX IN mode to radio mode or BT mode.
Function
Press briefly to start/stop
playback.
Press briefly to move to the
next track.
Press briefly to go to the
beginning of the current track.
Press briefly again to go back
to the previous track.
Press for approx. 2 seconds to
unpair the devices.
EN
39