Component Specifications; Performance Specifications - 3M DBI-SALA Nano-Lok Manual Del Usuario

;
Before using this equipment, record the product identification information from the ID label in the 'Inspection and
Maintenance Log' at the back of this manual.
;
Always ensure you are using the latest revision of your 3M instruction manual. Visit the 3M website or contact 3M
Technical Services for updated instruction manuals.
;
If the product is re-sold outside of the original country of destination, the reseller shall provide instructions for use, for
maintenance, for periodic examination, and for repair in the language of the country in which the product is to be used.
DESCRIPTION:
Figure 2 identifies key components of the 3M™ DBI-SALA
wound Web Lifelines (A) with an in-line Energy Absorber (B) that retracts into a Nylon Housing (C). A Swivel Eye (D) on the
top of the Housing allows attachment to a valid anchorage connection point with a Carabiner (E), or mounting on a Full Body
Harness with a Harness Interface (F). Figure 1 identifies available Nano-Lok models and their connector configurations. See
Table 1 for Nano-Lok SRD and connector specifications.
Hot Work: Fire resistant "Hot Work" models are available for welding, foundry work, etc. where the SRD may be exposed
to sparks or flames for short durations.

Component Specifications:

SRL Housings
Drum
Internal Components
Web Lifeline
Energy Absorber
Swivel
Connector Specifications:
Description
Carabiner
1
Carabiner
2
Single SRD Interface
3
Twin SRD Interface
4
Rebar Hook
5
Rebar Hook
6
Snap Hook
7

Performance Specifications:

Capacity
Maximum Arresting Force
Average Arresting Force
Maximum Free Fall Distance Allowed
Minimum Fall Clearance
Nano-Lok Self-Retracting Devices (SRDs). Nano-Lok SRDs are drum
®
Table 1 – Specifications
Nylon
Nylon
Stainless Steel and Zinc Plated Steel
Hot Work: Kevlar Nomex
Cover: Denier Textured Nylon, Web: Polyester, Stitching: Polyester or Nylon Thread
Zinc Plated Steel
Material Gate Opening
Steel 17 mm (11/16 in.)
Alloy Steel 19 mm (3/4 in.)
Steel 17 mm (11/16 in.)
Steel with Nylon Insert 3/4 in (19 mm)
Aluminum 57 mm (2-1/4 in.)
Aluminum 57 mm (2-1/4 in.)
Steel 19 mm (3/4 in.)
140 kg (310 lb.)
6 kN (1,350 lbf)
4 kN (900 lbf)
1.5 m (5 ft.)
2.3 m (7.6 ft.) when anchored directly overhead. See Figure 4.
11
Gate Strength Tensile Strength
16 kN (3,600 lbf) 22.2 kN (5,000 lbf)
16 kN (3,600 lbf) 22.2 kN (5,000 lbf)
22.2 kN (5,000 lbf)
16 kN (3,600 lbf) 22.2 kN (5,000 lbf)
1 kN (224.8 lbf) 22.2 kN (5,000 lbf)
16 kN (3,600 lbf) 22.2 kN (5,000 lbf)
16 kN (3,600 lbf) 22.2 kN (5,000 lbf)