Connect The Scantool To The Vehicle; Using Video Tutorials - MAHLE Digital ADAS 2.0 Manual De Instrucciones

16
Digital ADAS 2.0
User manual
6.2
Connect the scantool to
the vehicle
The scantool instrument must be connected to
the vehicle via the VCI diagnostic probe.

Connect the scantool to the vehicle

Turn on the scantool
1
2 From the scantool , check the posi-
tioning of the diagnostic connector,
based on the selected vehicle
3 Connect the VCI diagnostic probe
of the scantool to the On-board
diagnostics (OBD) connector inside
the vehicle
Refer to the scantool manual for
specific operations concerning its
use.
6.3

Using video tutorials

The Digital ADAS 2.0 system includes video tu-
torials demonstrating calibration procedures.
The user can choose to view them on digital tar-
get, skip to the next video, etc.
Press at the bottom of the screen to access the
video tutorial display.
Icons legend
Press to view the video
Press to go to the previous or
next video