Radar Calibration - MAHLE Digital ADAS 2.0 Manual De Instrucciones

6.5

Radar calibration

Static radar calibration configuration
(standard)
To perform the static front radar calibration, you
must first proceed with its configuration accord-
ing to the selected vehicle.
For vehicles that require a dedicated tool (in-
strument, device, accessory, etc.) refer to the
instructions on the scantool.
Static radar calibration configuration
1 Select the "ADAS" functions menu
from the scantool
2 Select the "Static front radar calibra-
tion" function and press the "Next"
icon
3 The list of accessories necessary for
performing the procedure is shown
on the scantool display. The operator
must therefore have these accesso-
ries available
Then press the "Next" icon
4 Preliminary information is displayed on
the scantool display, such as:
4.1 when calibration is to be per-
formed,
4.2 preliminary conditions
The operator must read this informa-
tion
Then press the "Next" icon
23