Push Axis Calibration Procedure (Cesvi Compliant) - MAHLE Digital ADAS 2.0 Manual De Instrucciones

36
Digital ADAS 2.0
User manual
6.8
Push axis calibration
procedure (CESVI
compliant)
In case it is necessary to perform the calibration
from the push axis, the following procedure must
be followed.
Push axis calibration procedure
1 Select the type of test in the settings
2 During the execution of the proce-
dure the measurement of the vehicle
wheelbase is required (first measuring
the distance from the clip on the rear
wheel and then on the front one)
Press "Next"
Enter the measure of the wheelbase
3
and press "Next"
4 Carry out the calibration with the clip
positioned on the rear wheels following
the indications