MAHLE Digital ADAS 2.0 Manual De Instrucciones página 28

28
Digital ADAS 2.0
User manual
12 A verification message is then shown
on the display
Press the "Next" icon
The third radar check is then per-
formed
A message appears on the display
13
indicating that a manual sensor ad-
justment is required
An image with the placement of
screws to be handled is also dis-
played
Press the "Next" icon
14 A summary of the calibration values is
then shown on the display
Press the "Next" icon
15 If the system finds it necessary to
make other adjustments, it indicates
this on the display
Then proceed with any requested
adjustments
16 When calibration is complete, a
message indicating "Adjustment
completed successfully" is shown on
the scantool display
Follow the above procedure until
the radar is in the correct position.
Carry out any adjustments indicated on the
scantool.