MAHLE Digital ADAS 2.0 Manual De Instrucciones página 18

18
Digital ADAS 2.0
User manual
5 Position the Digital ADAS 2.0 struc-
ture as shown in the image appearing
on the display
Mount the clips on the front wheels:
6
6.1 place the clip on the rim;
6.2 turn the adjustment knob to cen-
ter it on the wheel hub;
6.3 then, level the reference posi-
tioned on the same clip
Press the "Next" icon
Note: The clips can be clamping or
support
7 Turn on the rangefinders and point the
laser at the reference on the clip, in
order to respect the distances indicat-
ed on the scantool
Note: The laser must be positioned
on the vertical white line present in
the reference, but not necessarily in
its center
8 Move the structure until the read val-
ues turn green. Distance and position
data are automatically acquired when
the "Next" icon is pressed
9 The value at which the digital target
should be positioned is shown on the
scantool display. Then use the vertical
remote control to adjust the Digital
ADAS 2.0 structure
Press the "Next" icon
10 The scantool display shows the mes-
sage: "Setup completed. Press Play
to start "