Balluff BTL7-A/E501-M Serie Manual Del Usuario página 59

BTL7-A/E501-M_ _ _ _-J-DEXC-TA12
Magnetostrictive Linear Position Sensor – Rod Style
9
Adjust with the calibration device (continued)
Set end point
► Bring magnet to the new end point.
‚ ‚
► Hold down
for at least 2 s.
⇒ The new end point is set with the last
valid end value.
Adjust end value
► The end value can be changed using
gradient of the curve changes
(see page 20).
► End calibration procedure: Briefly press
simultaneously (< 1 s).
⇒ Set position value is saved.
End adjustment
Œ Œ ‚ ‚
► Briefly press
and simultaneously (< 1 s).
⇒ The current position value is displayed once the
buttons are released.
Any of the individual steps for settings can be
selected. The adjustment process can be
ended at any time.
1 = blue button
= gray button
2
www.balluff.com
> 2 s
1
1
Œ Œ ‚ ‚
and . The
1)
2
2
Œ Œ ‚ ‚
and
< 1 s
< 1 s
Type of protection "db" and "t"
Flameproof enclosure
Displayed values (example)
At 0...10 V
9.89 V
2
10.00 V
10.00 V
8.00 V
8.00 V
1
2
1 2
english
At 4...20 mA
19.13 mA
20.00 mA
20.00 mA
16.80 mA
16.80 mA
23