Cognex In-Sight CIO-MICRO Guia De Inicio Rapido página 5

Precautions
• The maximum torque that can be applied to the terminal block connectors
is 0.1921 Nm (1.7 in-lb). Applying torque above this limit can damage the
connectors.
• The I/O module does not contain user-serviceable parts. Do not make any
electrical or mechanical modifi cations. Unauthorized modifi cations may void your
warranty.
• Changes or modifi cations not expressly approved by the party responsible for
regulatory compliance could void the user's authority to operate the equipment.
• The I/O module is intended for indoor use only.
• The I/O module supports In-Sight 5600 series vision systems. When using an
In-Sight 5600 series vision system, the vision system's Ethernet cable must
be connected to the I/O module's PoE port and its I/O Module cable must be
connected to the I/O port.
• Access to the encoder inputs on the In-Sight 5604 (Line Scan) is not supported
by the I/O module.
• HS COMMON is not used for high-speed outputs with In-Sight 5600 series vision
systems. The return must use –24VDC.
• Cable shielding can be degraded or cables can be damaged or wear out more
quickly if a bend radius or service loop is tighter than 10X the cable diameter.
• Service loops should be included with all cable connections.
3