Environment Concerns - AEG HE634400XB Manual De Instrucciones

28

Environment concerns

Problem
There is no sig-
nal when you
touch the pan-
el sensor fields.
comes on
comes on
and num-
ber comes on.
comes on
If you tried the above solutions and cannot repair the problem, speak to your dealer or the
Customer Care Department. Give the data from the rating plate, three-digit-letter code for
the glass ceramic (it is in the corner of the cooking surface) and an error message that
comes on.
If you operated the appliance incorrectly, the servicing by a customer service technician or
dealer will not be free of charge, even during the warranty period. The instructions about
the customer service and conditions of guarantee are in the guarantee booklet.
ENVIRONMENT CONCERNS
The symbol
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this product,
please contact your local council, your household waste disposal service or the shop where
you purchased the product.
All manuals and user guides at all-guides.com
The signals are deactivated. Activate the signals (see OffSound Control).
The Automatic Switch Off operates. Deactivate the cooking zone and activate it
again after 60 seconds.
If after 60 seconds
• No cookware on the cooking zone. Put cookware on the cooking zone.
• Not correct cookware. Use the correct cookware.
• The diameter of the bottom of the cookware is too small for the cooking zone.
Use cookware with correct dimensions.
• The cookware do not cove the cross. Cover the cross fully.
There is an error in the appliance.
Disconnect the appliance from the electrical supply for some time. Disconnect the
fuse from the electrical system of the house. Connect again. If
again, speak to the service centre.
There is an error in the appliance, because a cookware boils dry. The protection
against become too hot for the cooking zone operates. The Automatic Switch Off
operates.
Deactivate the appliance. Remove the hot cookware. After, approximately 30 sec-
onds activate the cooking zone again.
heat indicator can stay. Let the cookware become sufficiently cool and check it
with the section Cookware for the induction cooking zone.
on the product or on its packaging indicates that this product may not be
Possible cause and remedy
comes on again speak to the service centre.
should go out of the display, residual
comes on