Inserting Zippers And Piping; Hand-Look Quilt Stitch; Straight Stitch With Auto Tie-Off Function - Singer Curvy 8770 Manual De Instrucciones

INSERTING ZIPPERS AND PIPING

Use zipper foot to sew to the right or left of the zipper or to
sew close to the cording.
INSERTING ZIPPERS
To sew down the right side, attach left side of zipper foot to
presser foot holder so that the needle passes through the
opening on the left side of the foot.
To sew down the left side, attach right side of foot to foot
holder.
PIPING
Create a piping by covering a filler cord with a bias strip of fabric.
Attach the right side of the zipper foot to the foot holder so that
the needle passes through the right side of the zipper foot.
Baste the seam allowances together, enclosing the filler cord,
forming seam tape for the piping.
Helpful Hint: Slight adjusting of the needle position to
sew closer to the piping may be accomplished with
the Stitch Width Control.

HAND-LOOK QUILT STITCH

This stitch is designed to look like hand sewing for topstitching
and quilting.
1. Thread bobbin with desired top stitching color. When
sewing the machine will pull this thread to the top.
2. Thread machine with invisible or lightweight thread the color
that matches your fabric. This thread should not show.
3. Increase thread tension a little bit at a time until you
acheive the desired appearance.
4. Start to sew.
NOTE: For a dramatic appearance, experiment with
different tension and stitch length combinations.
STRAIGHT STITCH WITH AUTO
TIE-OFF FUNCTION
1. Press the foot control and the machine will sew 4 stitches
forward and then 4 stitches in reverse and continue to sew
forward until the foot control is released.
2. Push the reverse button and the machine will sew 4
stitches in reverse and then 4 stitches in forward and stop.
42
Needle to left of foot
Aiguille à gauche du pied presseur
Aguja a la izquierda del
prensatelas
Needle to right of foot
Aiguille à droite du pied presseur
Aguja a la derecha del
prensatelas