Installation Instructions; Electrical Connection - Smeg SEFR535X Modo De Empleo

GB
 It is necessary to provide a bipolar cut-off device in your power supply
circuit, where the opening of the contacts is more than 3 mm.
 The plug must be accessible after installation.
 If the supply lead is damaged, it must be replaced by an equivalent lead
(H05RNF 3x1mm²) available from the after-sales department.
 A 16-ampere fuse is necessary.
 Your PGF30F fryer uses 2,200 watts. It is therefore absolutely
necessary for your electric wiring system to be able to supply that power
without danger. IT IS VITAL that your fryer is connected to earth.
IT IS ABSOLUTELY IMPERATIVE TO LEAVE A SPACE OF AT LEAST
5 CM BETWEEN THE BOTTOM OF THE FRYER AND THE FIRST
SHELF OF THE KITCHEN UNIT.

ELECTRICAL CONNECTION

24

1. Installation instructions