Kit Assembly - Metra 99-7015CHG Instrucciones De Instalación

ISO DIN radio provision with pocket
1. Mount the pocket to the radio
brackets with (4) of the supplied
# 8 x 3/8" Phillips screws.
(Figure A)
2. Mount the bracket/pocket
assembly to the housing trim panel
with the remaining (4) included
#8 x 3/8" Phillips screws.
(Figure B)
3. Slide the radio into radio brackets
and secure with screws supplied
with the radio. (Figure C)
4. Locate the factory wiring harness
and antenna, plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
5. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.
99-7015CHG

Kit Assembly

(Figure A) (Figure B)
3
(Figure C)