23
Installation
• A stand pipe with vent-hole. The internal di-
ameter must be minimum 4 cm.
max 85 cm
Remove the sink plug when the appliance
drains the water to prevent that the water goes
back into the appliance.
min 40 cm
The drain hose extension must not be longer
than 2 m. The internal diameter must not be
smaller than the diameter of the hose.
If you connect the water drain hose to a trap spi-
got under the sink, remove the plastic membrane
(A). If you do not remove the membrane, remain-
ing food can cause a blockage in the drain hose
spigot
A safety device impedes the dirty water to go back
into the appliance. If, the spigot of the sink has a
'non-return valve', this can cause the appliance to
drain incorrectly. Remove the non-return valve.