Battery Replacement - TFA 31.1131 Instrucciones De Uso

TFA_No. 31.1131_Anleitung
Multi-Beam - Infrared Thermometer
with exact spot indication
• Remove the batteries if you do not use the product for a long period of
time.

6.1 Battery replacement

• The battery symbol appears permanently on the display.
full half-full
• Change the batteries when the battery symbol
play.
• Confirm the unit is power off before changing battery.
• The battery compartment is in the inside of the handle. Slide down the
battery compartment lid. Insert two new batteries 1,5 V AAA. Ensure
that the battery polarity is correct.
• Close the battery compartment again. The cover is properly inserted in
the housing, as soon as a click is heard.
7. Troubleshooting
Problems Solutions
➜ Switch on the unit – press and hold the
No display
➜ Ensure that the battery polarity is correct
➜ Change the batteries
➜ Large temperature changes in a short time
Er2
➜ Surrounding temperature is outside the
Er3
➜ Remove the batteries
Er *
and all other
errors
➜ Automatic switch-off after 15 seconds
Display "oFF"
➜ Measured temperature is outside measuring
Display "Hi/Lo"
If your device fails to work despite these measures contact the supplier from
whom you purchased it.
8. Waste disposal
This product has been manufactured using high-grade materials and compo-
nents which can be recycled and reused.
Never dispose of empty batteries and rechargeable batteries in
household waste. As a consumer, you are legally required to
take them to your retail store or to an appropriate collection
site depending on national or local regulations in order to pro-
tect the environment.
The symbols for the heavy metals contained are: Cd=cadmium,
Hg=mercury, Pb=lead
10
08.08.2013 14:59 Uhr Seite 6
empty
appears on the dis-
measuring button
operating range
Recommended wait time: at least 30 minutes
(confirm the unit is power off)
Recommended wait time: at least 60 seconds
range
Multi-Beam - Infrared Thermometer
with exact spot indication
This instrument is labelled in accordance with the EU Waste
Electrical and Electronic Equipment Directive (WEEE).
Please do not dispose of this instrument in household waste.
The user is obligated to take end-of-life devices to a designat-
ed collection point for the disposal of electrical and electronic
equipment, in order to ensure environmentally-compatible dis-
posal.
9. Specifications
Temperature range: -60 °C ...+ 500 °C/ -76 °F...+932 °F
Operating environment: 0 °C ...+ 50 °C / +32 °F...+122 °F
Accuracy: +15 °C ...+ 35 °C / +59 °F...+95 °F:
±1 °C / 1,8 °F
-25 °C ...+ 500 °C / -13 °F...+932 °F:
±2 °C or 2 %
-60°C ...-25 °C / -76 °F...-13 °F:
±3 °C
Emissivity: 0.95 only
Resolution: -10°C...+200°C /+14°F...+392°F:
0.1°C / 0.1 °F
otherwise 1 °C / 1 °F
Response time (90%): 1 second
Optical resolution: 12 : 1
Power consumption: Batteries 2 x 1,5 V AAA
Automatic off-function: approx. 15 seconds
Dimensions: 49 x 85 x 185 mm
Weight: 159 g (instrument only)
TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, D-97877 Wertheim.
No part of this manual may be reproduced without written consent of TFA Dostmann. The
technical data are correct at the time of going to print and may change without prior notice.
www.tfa-dostmann.de 08/2013
11