Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
-The rotary switch should be placed in the
right position and no any changeover of
range shall be made during measurement
is conducted to prevent damage of the
Meter.
-When the Meter working at an effective
voltage over 60V in DC or 30V rms in AC,
special care should be taken for there is
danger of electric shock.
-Use the proper terminals, function, and
range for your measurements.
-Do not use or store the Meter in an
environment
of
high
temperature,
humidity, explosive, inflammable and
strong magnetic field. The performance
of the Meter may deteriorate after
dampened.
-When using the test leads, keep your
fingers behind the finger guards.
-Disconnect circuit power and discharge
all high-voltage capacitors before testing
resistance, continuity, diodes.
-Replace the battery as soon as the battery
18
Publicidad
Tabla de contenido
