Dc & Ac Voltage Measurement; Resistance Measurement - Avaly VA-266 Manual De Instrucciones

DC & AC VOLTAGE MEASUREMENT
1)Connect red test lead to "V" jack, Black
lead to "COM" jack.
2)Set RANGE switch to desired
VOLTAGE position, if the voltage to be
measured is not known beforehand, set
switch to the highest range and reduce it
until satisfactory reading is obtained.
3)Connect test leads to device or circuit
being measured.
4)Turn on power of the device or circuit
being measured voltage value will appear
on Digital Display along with the voltage
polarity.

RESISTANCE MEASUREMENT

1)Red lead to "Ω". Black lead to "COM".
2)RANGE switch to desired Ω position.
3)If the resistance being measured is
connected to a circuit, turn off power
and discharge all capacitors before
measurement.
4)Connect test leads to circuit being
25