Diode Measurement; Temperature Measurement - Avaly VA-266 Manual De Instrucciones

measured.
5)Read resistance value on Digital Display.

DIODE MEASUREMENT

1)Red lead to "Ω", Black lead to "COM".
2)RANGE switch to "
3)Connect the red test lead to the anode
of the diode to be measured and black
test lead to cathode.
4)The forward voltage drop in mV will be
displayed. If the diode is reversed, figure
"1" will be shown.

TEMPERATURE MEASUREMENT

1)set RANGE switch to ˚C or ˚F position,
it will display room temperature in ˚C or
˚F value.
2)Connect the black plug of K-type
thermocouple to "COM" jack, and the
red plug to "Ω" jack.
3)The display will read Temperature
value.
NOTE: The TP-01 K-type thermocouple
26
" position.