To prevent injury to the user or other people and property damage, the following instructions must be
followed. Incorrect operation due to ignoring of instructions may cause harm or damage. The seriousness is
classified by the following indications.
WARNING
CAUTION
Meanings of symbols used in this manual are as shown below.
Connect with the power
properly.
•
Otherwise, it may cause
electric shock or fire due to
excess heat generation.
Do not modify power
cord length or share the
outlet with other appliances
•
It may cause electric
shock or fire due to heat
generation.
Always ensure effective
earthing.
•
No earthing may cause
electric shock.
Disconnect the power if
strange sounds, smell, or
smoke comes from it.
•
It may cause fire and
electric shock.
Use the correctly rated
breaker or fuse.
•
There is risk of fire or
electric shock.
Ventilate room before operating air
conditioner if there is a gas leakage from
another appliance.
•
It may cause explosion, fire and, burns.
SAFETY PRECAUTIONS
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage to property.
Never do this.
Always do this.
WARNING
Do not operate or stop
the unit by switching on or
off the power.
•
It may cause electric
shock or fire due to heat
generation.
Do not operate with
wet hands or in damp
environment.
•
It may cause electric shock.
Do not allow water to
run into electric parts.
•
It may cause failure of
machine or electric shock.
Do not drink water
drained from air conditioner.
•
It contains contaminants
and could make you sick.
Do not use the power
cord close to heating
appliances.
•
It may cause fire and
electric shock.
Do not damage or use an
unspecified power cord.
•
It may cause electric shock
or fire.
Do not direct airflow at
room occupants only.
•
This could damage your
health.
Always install circuit
breaker and a dedicated
power circuit.
•
No installation may cause
fire and electric shock.
Do not open the unit
during operation.
•
It may cause electric shock.
Do not use the power
cord near flammable gas
or combustibles, such as
gasoline, benzene, thinner,
etc.
•
It may cause an explosion
or fire.
Do not disassemble or modify unit.
•
It may cause failure and electric shock.
26