How The Air Conditioner Works - Hiyasu ASE7U-RC Manual Del Usuario

How the air conditioner works

SLEEP operation
7 hours timer off
1
Set
Temperature 1
1 hour 1 hour
Cooling
SLEEP operation
7 hours timer off
Set
1
Temperature
1
1 hour 1 hour
Heating
31
AUTO operation
• When you set the air conditioner in AUTO mode, it
will automatically select cooling, heating(cooling/
heating models only), or fan only operation depending
on what temperature you have selected and the room
temperature.
• The air conditioner will control room temperature
automatically round the temperature point set by you.
• If the AUTO mode is uncomfortable, you can select
desired conditions manually.
SLEEP operation
When you push SLEEP button on remote controller during
cooling, heating(cooling only type without), or AUTO
operation, the air conditioner will automatically increase
(cooling) or decrease (heating)1ºC per hour.
The set temperature will be steady 2 hours later. And the air
conditioner will be timer off in 7 hours. The fan speed will be
automatically controlled. This feature can maintain the most
comfortable temperature and save more energy for you.
DRYING operation
• The temperature is regulated while dehumidifying by
repeating turning on and off of the cooling operation or
fan only. The fan speed indicator will display AUTO and
low speed will be used.
Optimal operation
To achieve optimal performance, please note the following:
• Adjust the air flow direction correctly so that it is not
directed on people.
• Adjust the temperature to achieve the highest comfort
level. Do not adjust the unit to excessive temperature
levels.
• Close doors and windows on COOL or HEAT modes, or
performance may be reduced.
• Use TIMER ON button on the remote controller to select
a time you want to start your air conditioner.
• Do not put any object near air inlet or air outlet, as the
efficiency of the air conditioner may be reduced and the
air conditioner may stop running.
• Clean the air filter periodically, otherwise cooling or
heating performance may be reduced.
• Do not operate unit with horizontal louvre in closed
position.