Technoline WS 9900 Manual De Instrucciones página 21

3. Press shortly the set key to advance to the MANUAL TIME
SETTING.
Manual time setting
User can manually set the time of the temperature station by using the
following steps:
1. The hour digit of the time display will be flashing.
2. Press the + key to adjust the hour. Press and hold to allow fast
advancing. Press set key to confirm and go to the minute setting.
3. The minute digit will be flashing. Press the + key to adjust the
minute. Press and hold to allow fast advancing. Press set key
once more to return to normal display.
Viewing the minimum and maximum readings:
User may view the minimum and maximum indoor temperature,
minimum and maximum outdoor temperature data records by the
following steps:
1. Press the min/max key once to view the minimum indoor
temperature, minimum outdoor temperature.
2. Press the min/max key once more to view the maximum indoor
temperature, maximum outdoor temperature.
Resetting the minimum and maximum readings:
User may reset the minimum and maximum temperature data to the
current value by the following steps:
1. Press the min/max once to display the min data.
2. Press and hold the min/max key for about 3 seconds to reset all
the minimum/ maximum data to the current values in a single
action.
3. Data of all outdoor and the indoor sensor will be reset at the
same time.
Temperature sensor:
The outdoor temperature is measured and transmitted to the
temperature station every 4 seconds approximately.
The range of the temperature sensor may be affected by the
temperature. At cold temperatures, the transmitting distance may be
decreased. Please bear this in mind when placing the sensor.
EN7