Gewiss JOINON WALLBOX I-CON PREMIUM Manual De Uso E Instalación página 72

JOINON WALLBOX I-CON PREMIUM electric vehicle recharging unit
72
To enable a recharging session:
METHOD 1
# Action to be carried out
1 Make sure there are no errors on the charging station
Insert the charging plug in the socket-outlet of the station, and in the
vehicle
2
or
Connect the mobile connector to the vehicle.
If a time range is set for enabling the charging, the station will remain
3A
in stand-by until the set time is reached
If a time range is not set for enabling charging, the station will imme-
3B
diately manage the communication with the vehicle
4 The vehicle requests energy from the recharging station
5 Charging session in progress but car battery charged
The charging session was not interrupted by the customer before the
6A end of the set time, therefore it was ended directly by the charging
station
The charging session was ended by the customer by disconnecting
6B
the cable from the vehicle
7 If the station detects no errors, it will return to standby
NOTE= To end the charging session, stop it first on the vehicle (the method will change depending on the vehi-
cle model. we suggest you refer to the manual of your vehicle to find the right method). The cable can now be
removed from the vehicle, terminating the charging operation. The station will now allow you to remove the plug.
The following correspondence table indicates the charging power values used by the station and that can be set
using the APP or the graphic interface
SELECTED
OPERATING VERSION
MODE
CABLE AND
MOBILE
CONNECTOR
OR
ECO
FLUSH-
MOUNTING
SOCKET-OUTLET
*NOTE= it's important to remember that the current values indicated refer to a single phase. This means that in
FACTORY
POWER SUPPLY
VALUE
(Amperes - Power)
20 A - 4.6 kW
SINGLE-PHASE
32 A - 7.4 kW
THREE-PHASE* 16 A - 11 kW
RGB LED status
Fixed green
Fixed green
Flashing blue
Flashing blue
or
Fixed blue
Fixed blue
Flashing blue
Flashing green
Flashing green
Fixed green
SETTABLE
VALUE IN THE APP OR ON
THE GRAPHIC INTERFACE
(Amperes - Power)
20 A - 4.6 kW
18 A - 4.1 kW
15 A - 3.5 kW
13 A - 3 kW
10 A - 2.3 kW
8 A - 1.8 kW
32 A - 7.4 kW
25 A - 5.8 kW
20 A- 4.6 kW
18 A - 4.1 kW
15 A - 3.5 kW
13 A - 3 kW
10 A - 2.3 kW
8 A - 1.8 kW
16 A - 11 kW
13 A - 9 kW
10 A - 6.9 kW
8 A - 5.5 kW