Cloud Ocpp Operating Mode - Gewiss JOINON WALLBOX I-CON PREMIUM Manual De Uso E Instalación

Unidad de carga para vehículos eléctricos
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 122
To delete an RFID card from the local list:
#
Action to be carried out
Swipe the MASTER key across the RFID reader to access the secret
1
menu
2
Move in the menu using the slider
CARD DELETION
3
Confirm the selection with the push-button
Take each card that you want to delete from the list and swipe it
4
across the RFID scanner. The colour of the RGB LED and the text on
the main display indicate correct deletion
To exit the RFID card deletion menu and return to the previous item,
5
wait until timeout ends.
6
Go to the EXIT item in the menu
To enable a recharging session:
#
Action to be carried out
1
Make sure there are no errors on the charging station
Swipe an RFID card across the scanner, close to the graphic
2
symbol
If the card is recognised (i.e. it's in the local list), the recharg-
3
ing station is activated to begin the charging session, and
waits for the vehicle to be connected.
Once the vehicle has been connected, the station checks
4
that everything is OK for the charging session
If there are no problems, the charging station will block the
5
plug in the socket-outlet both electrically and mechanically
(not for versions with a cable). The recharging session begins
6
The vehicle requests energy from the recharging station
7
Recharging session in progress
To end the charging session, take the same RFID card used
to launch the session and swipe it across the scanner again.
8
The station ends the charging session by releasing the plug
from the Type 2 socket-outlet (not for versions with a cable)
Take the plug out of the socket-outlet on the charging station
9
side
10 If the station detects no errors, it will return to standby

12.3 CLOUD OCPP OPERATING MODE

In this mode, the charging station is connected to a control platform via the OCPP protocol. The OCPP protocol
allows the station to connect to any platform which uses that protocol. To take advantage of this mode, a specific
parameter configuration is needed in order to create correct station-platform communication. The use of con-
nected solutions allows access to a series of advanced options that give both the end user and the owner better
access to the service. The end user can use the JOINON app or a similar expedient to find the nearest recharging
station and access the service by following the instructions given. The station owner can monitor the status of the
station and the consumption level from remote and in real time.
until reaching the item RFID
RGB LED status
Fixed green
Fixed green
Flashing green
Flashing green
Flashing blue
Fixed blue
Fixed blue or flashing blue
From fixed blue or flashing blue to flash-
ing green
From flashing green to fixed green
Fixed green
RGB LED / Touch Slider status
From fixed green to flashing
white
Flashing white
Flashing red/ anticlockwise light
effects
Fixed green for 2 seconds
From flashing white to fixed
green
75

Publicidad

Tabla de contenido
loading

Tabla de contenido