Joinon Wallbox I-Con Premium Electric Vehicle Recharging Unit; Rfid Operating Mode - Gewiss JOINON WALLBOX I-CON PREMIUM Manual De Uso E Instalación

JOINON WALLBOX I-CON PREMIUM electric vehicle recharging unit

74

12.2 RFID OPERATING MODE

The station activates the charging session once a valid RFID card has been swiped.
There are two ways of adding more RFID cards to the local list:
METHOD 1
# Action to be carried out
1 Swipe the MASTER key across the RFID reader to access the secret menu From fixed green to flashing white
2 Move in the menu using the slider
reaching the item RFID CARD MEMORISATION
3
Confirm the selection with the push-button
Take each card that you want to add to the list and swipe them across
4 the RFID scanner. The colour of the RGB LED and the text on the main
display indicate correct acquisition
To exit the RFID card memorisation menu and return to the previous
5
item, wait until timeout ends.
6 Go to the EXIT item in the menu
METHOD 2
# Action to be carried out
1 Disconnect the power supply to the product by turning off the main switch
2 Open the charging station to access the electronic board
3 Remove the microSD card from its slot on the electronic board
4 Insert the microSD card in the specific slot of your PC to open the folder
Create a .csv file called "RFID.csv".
The file structure must be
UID1;
UID2;
5
Example
A14HNL5T;
DZ47TBD5;
....
6 Save the file in the main directory of the microSD card
7 Insert the microSD card in the slot on the electronic board again
Close the recharging station and reconnect the power supply to launch the procedure. If the procedure has
8 been completed without errors, the station will import the file and the data it contains. The LEDs will flash
blue, 3 times. At the end of the import procedure, the file will be renamed RFID_old.csv on the microSD.
9 Once the command has been executed, the station will return to standby
Contact GEWISS SAT customer service for the UID codes of your RFID cards; you will be asked to give the number
on the cards. 4-byte or 7-byte cards can be saved, as long as they are compatible with standard ISO/IEC 14443
part A
until
RGB LED / Touch Slider status
Flashing white
Flashing white/ clockwise light
effects
Fixed green for 2 seconds
From flashing white to fixed green