Technical Data; Product Description And Specifications; Intended Use; Product Features - Bosch DLE 70 Professional Manual Del Usuario

OBJ_DOKU-39859-001.fm Page 15 Thursday, August 14, 2014 9:32 AM
 Do not allow children to use the laser measuring tool
without supervision. They could unintentionally blind
other persons or themselves.
 Do not operate the measuring tool in explosive environ-
ments, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the measuring
tool which may ignite the dust or fumes.
 Keep the positioning pin 15 away from "live" wires or
parts. There is a risk of electric shock.

Technical Data

Digital Laser Measure
Article number
Measuring range
Measuring accuracy (typical)
Lowest indication unit
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
Laser beam diameter (at 25 °C) approx.
– at 10 m distance
– at 70 m distance
Batteries
Rechargeable batteries
Battery life, approx.
– Individual measurements
– Continuous measurements (minimum/maximum measurement)
Automatic switch-off after approx.
– Laser
– Measuring tool (without measurement)
Weight according to EPTA-Procedure 01/2003
Dimensions
Degree of protection (excluding battery compartment)
A) The working range increases depending on how well the laser light is reflected from the surface of the target (scattered, not reflective) and with
increased brightness of the laser point to the ambient light intensity (interior spaces, twilight). In unfavourable conditions (e.g. when measuring
outdoors at intense sunlight), it may be necessary to use the target plate.
B) In unfavourable conditions (e.g. when measuring outdoors at intense sunlight or an insufficiently reflecting surface), the maximum deviation is
±10 mm per 70 m. In favourable conditions, a deviation influence of ±0.05 mm/m must be taken into account.
C) For continuous measurements (minimum/maximum measurement function), the max. operating temperature range is +40 °C.
D) Less measurements are possible when using 1.2 V rechargeable batteries than with 1.5 V batteries.
The measuring tool can be clearly identified with the serial number 20 on the type plate.

Product Features

The numbering of the product features shown refers to the
illustration of the measuring tool on the graphic page.
1 Button for selection of the reference level
2 Memory retrieve button "M="
3 Memory add button "M+"
Bosch Power Tools
Product Description and Specifica-
tions
Please unfold the fold-out page with the representation of the
measuring tool and leave it unfolded while reading the operat-
ing instructions.

Intended Use

The measuring tool is intended for measuring distances,
lengths, heights, clearances, and for the calculation of areas
and volumes. The measuring tool is suitable for measuring
indoors and outdoors.
IP 54 (dust and splash water protected)
4 Button for minimum and maximum measurement
(incl. continuous measurement)
5 Button for length, area and volume measurement
6 Spirit level
7 Display
8 Alignment aid
English | 15
DLE 70 Professional
3 601 K16 60.
A)
0.05–70 m
B)
±1.5 mm
1 mm
C)
–10 °C...+50 °C
–20 °C...+70 °C
90 %
2
635 nm, <1 mW
6 mm
42 mm
4 x 1.5 V LR03 (AAA)
4 x 1.2 V HR03 (AAA)
D)
30000
D)
5 h
20 s
5 min
0.18 kg
59 x 100 x 32 mm
1 609 92A 0L8 | (14.8.14)