3, Remove t ophingescrewby removing h ingecover
screw witha Phillips screwdriver°
Handles
r f
Removing
Doors
Some installations may require door removal to get the
refrigerator into the home If so, perform the following
steps:
.
2
Remove toe grilte_
Loosen water tube clamp screw Loosen plastic
water tube union nut, Pull water tube away from
union nut and through tube clamp.
Plastic water tube
union nut
Water
tube
Water tube clamp screw
Top
Hinge cover
l
WARNING
To avoid electrical shock which can cause severe
personal injury or death, green ground wire must
remain attached to hinge,
4
Unplug top hinge wire connector& Do not remove
green ground wire from hinge (Freezer door ice and
water dispensing units only)., Remove top hinge
screws° Carefully lift and remove top hinges,
Freezer door only
Top hinge
Wire
ground wire
5o Carefully lift doors off bottom hinge.
6,
Replace doors by performing steps 1-5 in reverse
order.
Install Water Filtration
Cartridge
(some
models)
1.
Remove bypass cartridge from water filter head in
rear right corner of refrigerator
section., Twist
cartridge counterclockwise 1/4turn and puli down to
remove, Save bypass for use at a later date.
2_ See Water Filtration System Installation and
Operating Instructions provided with water filter
cartridge for filter installation and operation.