Selecting Inputs - NAIM UNITIQUTE Guia De Inicio Rapido

UnitiQute Quick Start Guide
2 switching on and Getting started
• O nce all connections have been made, switch on UnitiQute using the rear panel power
switch. UnitiQute will display a welcome screen and select its rear panel Analogue input
or, if it has been used previously, the last input selected.
Note:
If UnitiQute is left unused its display will switch off after a preset time. The "Auto-off"
behaviour can be adjusted within the setup menus.
• U nitiQute is controlled from its remote handset only. Use the up
to select menu items and the ok/list key to confirm selections. To return to a previous
menu use the left ( 3 ) key. To adjust UnitiQute volume use the vol–
Note:
Touching the UnitiQute front panel logo will mute and un-mute its speaker and
headphone outputs.
nitiQute display language can be changed. Enter setup mode by pressing the setup
• U
( ) key and select the Language option followed by the desired option. Press the ok/list
key to confirm the selection. Exit setup mode by pressing the exit or setup key.
• I f a subwoofer or external power amplifier is connected, the UnitiQute preamplifier
output must be configured from the speakers setup menu. Press the setup
select speakers followed by Type. Select Large if a subwoofer is used to augment the
performance of full range speakers or an external power amplifier is connected. Select
small
if a subwoofer is used with limited bandwidth satellite speakers. Exit setup mode
by pressing the exit or setup key. See the Reference Manual for more information on
speaker and subwoofer setup options.
• U nitiQute is configured when shipped to connect to wired TCP/IP networks automatically.
However, if your UnitiQute has been previously used and its network configuration
altered, or your network router requires non-standard settings, it may not be able to do
so. Refer to the Reference Manual or contact your retailer if this appears to be the case.
• I f UnitiQute is to use a wireless network connection it is likely that configuration will
be required. Enter setup mode by pressing the setup
Wireless and select the desired wireless network name at the following menu. If the
wireless network is protected you will be prompted at the following screen to enter the
pass-phrase or access key. Use the numeric/text keys to enter the pass-phrase or access
key taking care to ensure that the letter case is correct. Refer to the Reference Manual
for more information.

3 selecting Inputs

• U nitiQute inputs can be selected using the up
selection keys.
• P ressing one of the input
a group of inputs. For example, pressing the Cd
pressing the radio key scrolls through a group comprising the FM, daB
selection key assignments are described in the Reference Manual. They
The default input
can be modified via the Inputs setup menu. Press the setup
Buttons option to modify input key assignments.
Full unitiQute installation and operational information can be found in the reference Manual
All manuals and user guides at all-guides.com
key and select Network. Select
and down keys or one of the input
selection keys either selects a single input or scrolls through
key selects the analogue input, while
available on line at www.naimaudio.com
( 5 ) and down ( 6 ) keys
and vol+ keys.
key and
and iradio inputs.
key and select the Handset
English
Note:
The n-Stream
app, available from the
iTunes App Store, enables
wireless touch screen
control of UnitiServe from
an iPhone or iPod touch.
Setup 1/9
4Language
Inputs
Speakers
Headphones
Language 1/7
4English
Deutsch
Français
Español
Speakers 1/4
Large
4Type:
Loudness No
Max. Volume: 100
Balance: 0
Network Settings 2/5
Name: Uniti-ED68
None
4Wireless:
Status: Connected
DHCP Yes
Select Network 3/6
<Don't Use Wireless>
LingNet
4GreenNet
TomNet
UnitiQute Setup 8/9
Network Settings
Digital Output
Front Display
4Handset Buttons
Inputs On:Radio 1/4
41. FM
2. DAB
3. iRadio
4. Unassigned