Belt Or Brush: Removal & Replacement - Dirt Devil F23 Manual Del Usuario

BELT OR BRUSHROLL: REMOVAL & REPLACEMENT
TOOL REQUIRED: PHILLIPS OR FLATHEAD SCREWDRIVER
WARNING: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG CLEANER BEFORE CHANGING BELT
OR BRUSHROLL.
BELT STYLE
20
For Belt Style 20 replacement, please visit our website at www.dirtdevil.com to buy
online or call customer service at 1-800-321-1134.
TO REMOVE BELT
2.
1.
Lay cleaner flat and flip cleaner Flip cleaner right side up. Rotate
to expose nozzle base. Base nozzle guard forward and lift off.
should lay flat and face up.
To remove nozzle guard, use
Phillips screwdriver to remove
the three (3) screws. Arrows
show location of screws.
TO REPLACE BELT OR BRUSHROLL
4. 5.
MOTOR SHAFT
Slide belt onto motorshaft. Place new belt in area of
brushroll without bristles.
7. 7a.
Reattach nozzle guard by aligning the four (4) tabs in the
base slots (Diagram 7). Rotate nozzle guard back in place
(Diagram 7a).
All manuals and user guides at all-guides.com
3.
Lift and remove brushroll.
Dispose of old belt.
6.
With new belt in
place, pull and
slide brushroll
into
making
that
brushroll
caps are in the
6a.
correct orientation
(6a
Rotate brushroll manually to make sure belt is
properly aligned.
8.
Replace all three (3) screws to
secure nozzle guard.
10
nozzle
sure
the
end
inset).