How To Assemble; How To Operate - Dirt Devil F23 Manual Del Usuario

HOW TO ASSEMBLE
HANDLE ASSEMBLY
1. 1a.
Press handle release button and slide
handle through top of back panel until it
snaps into place.
HOW TO OPERATE
CORD RELEASE
1.
Turn Quick Cord
Release for easy cord
removal.
ON/OFF SWITCH
3.
Plug cord into electrical
OFF
outlet. Turn cleaner on
by pressing the on/off
ON
switch located on the
side of unit.
CAUTION: Brush agitator continues to rotate while hose is removed or in use and at all times while cleaner
is on. Keep hair, loose clothing, fingers, and all parts of body away from brush area while cleaner is on.
Cleaner must be in the upright position to lift the rotation brush off the carpet when cleaning above the
floor.
All manuals and user guides at all-guides.com
TOOL STORAGE
2.
2a.
a
c
b
BACK FRONT
Attach tools: (a) Slide the dust brush into the hole
on the back of the cleaner with bristles facing out.
(b) Slide the crevice tool onto round post on the back
of the cleaner and snap into place (Diagram 2). (c)
Clip Power Brush Tool onto the front of the cleaner
(Diagram 2a).
HEIGHT ADJUST LEVER
2.
Turn the
adjustment knob to
match the surface
being cleaned.
IMPORTANT:
easiest adjustment,
place cleaner in full
upright position.
HANDLE RELEASE
PEDAL
4.
To release handle,
push the handle
release pedal located
on the lower left side
of the cleaner.
6
height
For