Sunny SF-RB4850 Manual Del Usuario página 12

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
ASSEMBLY INSTRUCTIONS
STEP 1:
Remove 2 shipping tubes (A), 8 Screws
(No. 20), 8 Spring Washers (No. 12) and 8
Flat Washers (No. 11) from the Main Frame
(No. 1) using Allen Wrench (No. 97).
NOTE: You may discard shipping tubes (A)
or save them to repackage the item in the
future.
Attach the Front Stabilizer (No. 5) and Rear
Stabilizer (No. 6) to the Main Frame (No. 1)
with 8 Screws (No. 20), 8 Spring Washers
(No. 12) and 8 Flat Washers (No. 11) that
were just removed. Tighten and secure with
the Allen Wrench (No. 97).
Attach the Adjustable Pad (No. 15) and
Hex Nut (No. 16) to the Main Frame (No. 1).
NOTE ： The
preassembled to the Adjustable Pad (No.
15).
STEP 2:
Attach the Pedals (No. 37L/R) to the Crank
(No. 23) using Spanner (No. 95).
Note: Make sure to attach the Left Pedal
(No. 37L), marked (L), to the Left Crank
(No. 23). It
COUNTER-CLOCKWISE. Make sure to
attach the Right Pedal (No. 37R), marked
(R), to the Right Crank (No. 23). It should
be tightened CLOCKWISE.
Attaching the Pedals (No. 37L/R) to the
wrong Crank (No. 23) or turning them the
wrong direction will damage the Crank (No.
23).
11
Hex Nut (No.
should be tightened
16) is