Sunny SF-RB4850 Manual Del Usuario página 15

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
STEP 6:
Remove 2 Screws (No. 19) from the Main
Frame (No. 1) using Spanner (No. 95).
Then attach 2 Rail Covers (No. 17) to the
Main Frame (No. 1) with 2 Screws (No. 19)
that were just removed using Spanner (No.
95).
Attach the Seat (No. 38) to the Seat Tube
(No. 3) with 4 Screws (No. 20) and 4 Flat
Washers (No. 11) using Allen Wrench (No.
97).
Attach the Backrest (No. 39) to the Seat
Tube (No. 3) with 4 Screws (No. 41) and 4
Flat Washers (No. 42). Tighten and secure
with Allen Wrench (No. 96).
Attach the Backrest Cover (No. 28) to the
Seat Tube (No. 3) with the Screw (No. 21)
using the Spanner (No. 95) to secure.
STEP 7:
Remove 4 Screws (No. 49) from the Meter
(No. 40) with Spanner (No. 95).
Connect the Extension Wire 2 (No. 56) and
Sensor Extension Wire (No. 47) to the
corresponding wires of Meter (No. 40). Then
attach the Meter (No. 40) to the bracket of
Handlebar Post (No. 2) with 4 Screws (No.
49) that were just removed. Tighten and
secure with the Spanner (No. 95).
NOTE: Insert all wires to the tube of
Handlebar Post (No. 2). Do not cut or pinch
any wires when attaching the Meter (No. 40)
The assembly is now complete! You can
connect the Adaptor (No. 55) to the Main
Frame (No. 1).
14