ADJUSTMENT GUIDE
ADJUSTING THE LEVEL
If the bike is not level, turn the dials on the Rear End
Caps (No. 32L/R) to adjust. Turn counterclockwise
to raise and turn clockwise to lower.
ADJUSTING THE SEAT
To move the Seat (No. 38) forward or backward,
while seated on the bike, put your feet on the floor.
Shift the Adjustment Handle (No. 8) down to
loosen. Move the Seat (No. 38). Shift the
Adjustment Handle (No. 8) up to secure.
MOVING THE BIKE
There are wheels located on the Front Stabilizer
(No. 5). Hold the handlebar on the Rear Stabilizer
(No. 6) and pull forward to lift the rear of the
recumbent bike off the floor. Now you can move the
recumbent bike.
15