Sunny SF-RB4850 Manual Del Usuario página 13

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
STEP 3:
Remove 4 Screws (No. 20), 4 Spring
Washers (No. 12) and 4 Arc Washers (No.
22) from the Main Frame (No. 1) using Allen
Wrench (No. 97).
Insert the Handlebar Post (No. 2) into the
Upright Tube Cover (No. 24) and move the
Upright Tube Cover (No. 24) higher.
Connect the Sensor Extension Wire (No.
47) with Sensor Wire (No. 46), and connect
Extension Wire 2 (No. 56) with Extension
Wire 1 (No. 44).
Attach the Handlebar Post (No. 2) to the
Main Frame (No. 1) with 4 Screws (No. 20),
4 Spring Washers (No. 12) and 4 Arc
Washers (No. 22) that were just removed.
Tighten and secure with the Allen Wrench
(No. 97).
Move the Upright Tube Cover (No. 24)
lower so it snaps into the Main Frame (No.
1).
STEP 4:
Remove 2 Screws (No. 20), 2 Spring
Washers (No. 12) and 2 Arc Washers (No.
22) from the Handlebar Post (No. 2) using
Allen Wrench (No. 97). Then attach the
Armrest (No. 7) to the Handlebar Post (No.
2) with 2 Screws (No. 20), 2 Spring
Washers (No. 12) and 2 Arc Washers (No.
22) that were just removed. Tighten and
secure with the Allen Wrench (No. 97).
Remove 2 Screws (No. 19) and 2 Flat
Washers (No. 53) from the Handlebar Post
(No. 2) using Spanner (No. 95). Then attach
the Bottle Holder (No. 54) to the Handlebar
Post (No. 2) with 2 Screws (No. 19) and 2
Flat Washers (No. 53) that were just
removed. Tighten and secure with the
Spanner (No. 95).
12