Publicidad
5.6
Adjustments, English
Transfer picture adjustment values to 6IC4
Transfer after replacing the main chassis
Plasma mode
WP-R
B
L-R
WP-G
B L-G
WP-B
C
OLOF
FILM MODE
BRIGHTNESS
CONTRAST
Projector mode
WP-R
B
L-R
WP-G
B L-G
WP-B
HT
BL-R
HT BL-G
HT BL-B
FILM MODE
BRIGHTNESS
CONTRAST
Projector mode
Projector mode
WP-R
BL-R
WP-G
BL-G
WP-B
HT BL-R
HT BL-G
HT BL-B
FILM MODE
BRIGHTNESS
CONTRAST
Plasma mode
Plasma mode
WP-R
BL-R
WP-G
BL-G
WP-B
COLOF
FILM MODE
BRIGHTNESS
CONTRAST
Important
The EEPROM 6IC4 contains, user set up and the data for picture adjustment.
In order to avoid loss of data, the old EEPROM 6IC4 must be transferred to the
new PCB6.
The correct data for the picture adjustment must be written into the EEPROM, 6IC4.
The data are printed on the label placed on PCB45.
There are picture adjustment values for Projektor mode and Plasma mode.
Transfer of picture adjustment values are done in Service mode.
Projector mode is only active with a projector connected and a projector must be
connected before picture adjustment values can be entered.
To enter Projector mode, press LIST until the Beo4 display reads FORMAT then
press 0 to toggle between Projektor mode and Plasma mode.
Enter data
Select the Monitor line and press GO. Now the Monitor service menu appears.
Select the Picture adjustments line in the Monitor service menu and press GO.
Place the cursor on the fi rst item and press GO. Now a sub menu appears.
l
n
Press
or
to adjust to the value written on the label.
p
Press
to step to the next sub menu and adjust to the value written on the label.
Repeat until all values are entered.
The values are
-
WP-R
-
WP-G
-
WP-B
-
BL-R
-
BL-G
-
HT BL-R
-
HT BL-G
-
HT BL-B
Press GO to store the adjustment.
Enter service mode, press on the Beo4 TV Menu 0 0 GO
Enter data
Select the Monitor line and press GO. Now the Monitor service menu appears.
Select the Picture adjustments line in the Monitor service menu and press GO.
Place the cursor on the fi rst item and press GO. Now a sub menu appears.
l
n
Press
or
to adjust to the value written on the label.
p
Press
to step to the next sub menu and adjust to the value written on the label.
Repeat until all values are entered.
The values are
-
WP-R
-
WP-G
-
WP-B
-
BL-R
-
BL-G
Press GO to store the adjustment.
Publicidad
